Abalone Row

Hold eight pairs of stud earrings and their backs

A stud earring dish after the abalone shell, which grows a row of breathing pores along its edge. Eight pores run along this one: push stud posts through the six small ones and hang heavier posts in the two large ones at the growing end, then drop the backs into the hollow of the shell.

Customize this model

Size: 100 × 65 × 17 mm
Shape: Custom outline
Walls: 2.0 mm
Volume: 18.5 cm³
Est. weight (PLA): 23.0 g
Parts to print: 1
Category: Jewellery & grooming
Made by: Krypto
Built in: 45 steps

What’s in it

Custom outline, 100 × 65 × 17 mm, with 2.0 mm walls
Custom outline traced from a shape
Raised round base
8 holes in the floor

How to print it

Print in a pearl or silk PLA.

Prints as shown on its outline, no supports.

Filament: at most about 23.0 g of PLA printed solid (roughly $0.46 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the abalone Row model?

The abalone Row model measures 100 × 65 × 17 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print in a pearl or silk PLA. Prints as shown on its outline, no supports.

How much filament does it use?

At most about 23.0 g of PLA (18.5 cm³ printed solid), roughly $0.46 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.