Pagewarden

Peek a little keeper over the top edge of a book

A bookmark with a guardian on top. The 2 mm strip slides between the pages while a round-headed little keeper peeks over the top of the book, both hands resting on the page edge, eyes cut through. It marks your place and makes a stack of books look inhabited.

Customize this model

Size: 47 × 175 × 7 mm
Shape: Custom outline
Walls: 2.0 mm
Volume: 8.2 cm³
Est. weight (PLA): 10.2 g
Parts to print: 1
Category: Paper & bookbinding
Made by: Krypto
Built in: 12 steps

What’s in it

Custom outline, 47 × 175 × 7 mm, with 2.0 mm walls
Custom outline traced from a shape
2 holes in the floor

How to print it

Print flat at 0.2 mm layers; PETG flexes without snapping.

Filament: at most about 10.2 g of PLA printed solid (roughly $0.20 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the pagewarden model?

The pagewarden model measures 47 × 175 × 7 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

Usually not. Print flat at 0.2 mm layers; PETG flexes without snapping.

How much filament does it use?

At most about 10.2 g of PLA (8.2 cm³ printed solid), roughly $0.20 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.