Memoria

Display a photo and LED candle in remembrance

A small shrine for remembering someone. A photo slides into the slot behind the back rail, an LED candle stands on the floor in front, and the overhanging cornice and low sill frame them like a chapel niche, with a short line engraved on the sill.

Customize this model

Size (Base A): 160 × 64 × 130 mm
Shape: Rectangular
Walls: 3.0 mm
Volume: 124 cm³
Est. weight (PLA): 154 g
Parts to print: 1
Category: Collections & display
Made by: Krypto
Built in: 23 steps

What’s in it

Rectangular, 160 × 64 × 130 mm, with 3.0 mm walls
1 divider
Engraved text: “IN MEMORY”
One more base built on (Base B)
Base B: rectangular, 172 × 76 mm (stacked)

How to print it

Fits a 6 x 4 inch landscape photo. LED candles only.

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

Filament: at most about 154 g of PLA printed solid (roughly $3.08 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the memoria model?

The memoria model measures 160 × 64 × 130 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Fits a 6 x 4 inch landscape photo. LED candles only. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

How much filament does it use?

At most about 154 g of PLA (124 cm³ printed solid), roughly $3.08 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.