Gabion End

Hold books with a cage full of collected pebbles

A bookend that is a little gabion wall. Fill the open cage with pebbles from the beach, a river or a holiday: the stones become the weight that holds the books and stay on show through the grid, a way to keep and look at the finds that usually end up in a drawer.

Customize this model

Size: 70 × 110 × 152 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 28.4 cm³
Est. weight (PLA): 35.2 g
Parts to print: 1
Category: Collections & display
Made by: Krypto
Built in: 13 steps

What’s in it

Rectangular, 70 × 110 × 152 mm, with 2.4 mm walls
Raised grip base
1 patterned wall panel (cut-out)

How to print it

Print upright; grip feet stop it sliding.

Prints as shown on its floor, no supports.

Filament: at most about 35.2 g of PLA printed solid (roughly $0.70 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the gabion End model?

The gabion End model measures 70 × 110 × 152 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print upright; grip feet stop it sliding. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 35.2 g of PLA (28.4 cm³ printed solid), roughly $0.70 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.