Sash Gallery

Frame four instant photos as window panes

A sash window frame for four instant photos. Print it face down: the glazing bars divide four panes sized for Instax Wide pictures, the photos slide in from behind with their white borders tucked under the bars, and a hole in the top rail takes a picture hook so your views look out of a window.

Customize this model

Size: 232 × 170 × 14 mm
Shape: Rectangular
Walls: 3.0 mm
Volume: 49.6 cm³
Est. weight (PLA): 61.5 g
Parts to print: 1
Category: Collections & display
Made by: Krypto
Built in: 41 steps

What’s in it

Rectangular, 232 × 170 × 14 mm, with 3.0 mm walls
5 holes in the floor and walls

How to print it

Print face down; back the photos with card and tape.

Prints as shown on its floor, no supports.

Filament: at most about 61.5 g of PLA printed solid (roughly $1.23 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the sash Gallery model?

The sash Gallery model measures 232 × 170 × 14 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print face down; back the photos with card and tape. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 61.5 g of PLA (49.6 cm³ printed solid), roughly $1.23 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.