Keyday

Hand over the keys to a new home in a box

A box for the day someone gets their keys. The lid carries a little house, the address and welcome home, and inside a long bay takes the first set of keys while a side bay holds the fob or a card with a note. Estate agents give them at completion; friends give them at the housewarming.

Customize this model

Size: 100 × 64 × 30 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 69.5 cm³
Est. weight (PLA): 86.2 g
Parts to print: 2
Category: Collections & display
Made by: Krypto
Built in: 30 steps

What’s in it

Rectangular, 100 × 64 × 30 mm, with 2.4 mm walls
1 divider
Engraved and raised text: “Label”, “12 ELM ROAD”, “WELCOME HOME”
Telescoping lid (prints separately)

How to print it

Print in white with the lid relief in a second colour.

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

Filament: at most about 86.2 g of PLA printed solid (roughly $1.72 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the keyday model?

The keyday model measures 100 × 64 × 30 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print in white with the lid relief in a second colour. Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

How much filament does it use?

At most about 86.2 g of PLA (69.5 cm³ printed solid), roughly $1.72 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.