Cubecast

Brand a handheld microphone with a channel cube

A mic flag for podcasters, streamers and street interviewers: the cube that slides onto a handheld microphone and shows the channel name to every camera. The 56 mm cube has a 40 mm hole underneath and a 36 mm hole on top, so it wedges onto the tapering handle, with the name in relief on all four faces.

Customize this model

Size (Base A): 56 × 56 × 56 mm
Shape: Square
Walls: 2.0 mm
Volume: 8.9 cm³
Est. weight (PLA): 11.0 g
Parts to print: 1
Category: Collections & display
Made by: Krypto
Built in: 36 steps

What’s in it

Square, 56 × 56 × 56 mm, with 2.0 mm walls
2 holes in the floor
Raised text: “@NORA.FM”
One more base built on (Base B)
Base B: square, 56 × 56 mm (stacked)

How to print it

Print in the channel colour; scale the holes to your mic handle.

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

Filament: at most about 11.0 g of PLA printed solid (roughly $0.22 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the cubecast model?

The cubecast model measures 56 × 56 × 56 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print in the channel colour; scale the holes to your mic handle. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

How much filament does it use?

At most about 11.0 g of PLA (8.9 cm³ printed solid), roughly $0.22 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.