Blindcube

Package printed figures as collectable blind boxes

Mystery packaging for printed figures. A 64 mm cube with a huge question mark on two faces, the series name and the edition on the others, and a lid that says open me. Creators selling small figures put one in each, so buyers collect the box as well as what is inside.

Customize this model

Size: 64 × 64 × 64 mm
Shape: Square
Walls: 2.0 mm
Volume: 35.2 cm³
Est. weight (PLA): 43.6 g
Parts to print: 2
Category: Collections & display
Made by: Krypto
Built in: 36 steps

What’s in it

Square, 64 × 64 × 64 mm, with 2.0 mm walls
Engraved and raised text: “?”, “SERIES 01”, “NO. 07 OF 12”, “OPEN ME”
Telescoping lid (prints separately)

How to print it

Print in batches; one colour per series.

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

Filament: at most about 43.6 g of PLA printed solid (roughly $0.87 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the blindcube model?

The blindcube model measures 64 × 64 × 64 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print in batches; one colour per series. Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

How much filament does it use?

At most about 43.6 g of PLA (35.2 cm³ printed solid), roughly $0.87 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.