AR view

Homecoming

Show who is home by where the keys are

One named bay per person by the front door: whoever comes in drops their keys into their own bay, and anyone passing can see at a glance who is home and who is still out. The low front wall shows the keys; change the four engraved names in the editor.

Customize this model

Size: 220 × 50 × 60 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 55.5 cm³
Est. weight (PLA): 68.8 g
Parts to print: 1
Category: Home hardware & architecture
Made by: Krypto
Built in: 36 steps

What’s in it

Rectangular, 220 × 50 × 60 mm, with 2.4 mm walls
3 dividers in a grid layout
Engraved text: “ALEX”, “SAM”, “JO”, “KIM”

How to print it

Print upright in PLA; two screws through the keyholes.

Prints as shown on its floor, no supports.

Filament: at most about 68.8 g of PLA printed solid (roughly $1.38 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the homecoming model?

The homecoming model measures 220 × 50 × 60 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print upright in PLA; two screws through the keyholes. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 68.8 g of PLA (55.5 cm³ printed solid), roughly $1.38 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.