AR view

Exit Pocket

Remember what to take when you leave

A pocket that hangs on the inside handle of the front door: slip the big hole in the back plate over the lever and drop in whatever must leave the house tomorrow, the letter to post, the parcel return label, the library card, the folded tote bag. You cannot open the door without touching it, so nothing is forgotten.

Customize this model

Size: 130 × 34 × 90 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 7.5 cm³
Est. weight (PLA): 9.3 g
Parts to print: 1
Category: Home hardware & architecture
Made by: Krypto
Built in: 26 steps

What’s in it

Rectangular, 130 × 34 × 90 mm, with 2.4 mm walls
1 hole in the walls
Engraved text: “TAKE ME”

How to print it

PLA or PETG, printed upright.

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

Filament: at most about 9.3 g of PLA printed solid (roughly $0.19 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the exit Pocket model?

The exit Pocket model measures 130 × 34 × 90 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

It may need supports in places. PLA or PETG, printed upright. Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

How much filament does it use?

At most about 9.3 g of PLA (7.5 cm³ printed solid), roughly $0.19 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.