AR view

Catalogue Pull

Pull and label a drawer in one fitting

A library-card-catalogue cup pull with the label built in: the closed front carries an engraved word such as SPICES, fingers hook into the open underside, and it bolts on from inside the drawer with two M4 bolts whose nuts you tighten through the opening. Turns plain flat-pack drawers into a labelled cabinet.

Customize this model

Size (Base A): 90 × 32 × 20 mm
Shape: Rectangular
Walls: 2.5 mm
Volume: 17.0 cm³
Est. weight (PLA): 21.1 g
Parts to print: 1
Category: Home hardware & architecture
Made by: Krypto
Built in: 26 steps

What’s in it

Rectangular, 90 × 32 × 20 mm, with 2.5 mm walls
2 holes in the floor
Engraved text: “SPICES”
One more base built on (Base B)
Base B: rectangular, 90 × 32 mm (stacked)

How to print it

Print on its back in PLA or PETG; two M4 bolts and nuts.

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

Filament: at most about 21.1 g of PLA printed solid (roughly $0.42 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the catalogue Pull model?

The catalogue Pull model measures 90 × 32 × 20 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print on its back in PLA or PETG; two M4 bolts and nuts. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

How much filament does it use?

At most about 21.1 g of PLA (17.0 cm³ printed solid), roughly $0.42 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More home hardware & architecture

Cable and hose hanger

Hang coiled cables and hoses

Advanced

Chair leg glide caps

Protect floors under chair legs

Simple (set)

Pipe floor flange

Mount tubes for rails and shelving

Medium

Rug corner gripper

Keep rug corners flat

Simple (set)

Picture rail hook

Hang pictures from a picture rail

Simple

Bulb Reach

Change spotlights and test alarms from the floor

Medium

Bleed Cup

Catch the water when bleeding radiators

Medium

Exit Pocket

Remember what to take when you leave

Simple

See all 86 in Home hardware & architecture

Make it fit your space

Change the size, walls, dividers, holes and labels of the catalogue Pull model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model