AR view

Bleed Cup

Catch the water when bleeding radiators

Hold it under the radiator valve with the key through the front notch: the cup catches the hiss of air and the spurt of dirty water while you open the valve, instead of a towel and a jam jar. Between uses the radiator key lives in the side holster, so it is never lost.

Customize this model

Size (Base A): 70 × 46 × 55 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 14.0 cm³
Est. weight (PLA): 17.3 g
Parts to print: 1
Category: Home hardware & architecture
Made by: Krypto
Built in: 30 steps

What’s in it

Rectangular, 70 × 46 × 55 mm, with 2.4 mm walls
Engraved text: “BLEED”
One more base built on (Base B)
Base B: round, Ø 16 mm, 40 mm tall (beside)

How to print it

PETG so it shrugs off hot water.

Prints as shown on its floor, no supports.

Filament: at most about 17.3 g of PLA printed solid (roughly $0.35 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the bleed Cup model?

The bleed Cup model measures 70 × 46 × 55 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. PETG so it shrugs off hot water. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 17.3 g of PLA (14.0 cm³ printed solid), roughly $0.35 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.