Hollowfolk

Hang an original spirit ornament in a window

A hooded spirit to hang in a window or on a tree. A 4 mm silhouette with a scalloped hem, a tab for the thread and two eyes cut right through, so light shines out of its face. Print a whole crowd in different colours; each one hangs at a slightly different angle like a gathering of ghosts.

Customize this model

Size: 48 × 86 × 9 mm
Shape: Custom outline
Walls: 4.0 mm
Volume: 11.2 cm³
Est. weight (PLA): 13.9 g
Parts to print: 1
Category: Geometric & decorative
Made by: Krypto
Built in: 17 steps

What’s in it

Custom outline, 48 × 86 × 9 mm, with 4.0 mm walls
Custom outline traced from a shape
3 holes in the floor

How to print it

Print flat; glow-in-the-dark or translucent PETG suits it.

Filament: at most about 13.9 g of PLA printed solid (roughly $0.28 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the hollowfolk model?

The hollowfolk model measures 48 × 86 × 9 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

Usually not. Print flat; glow-in-the-dark or translucent PETG suits it.

How much filament does it use?

At most about 13.9 g of PLA (11.2 cm³ printed solid), roughly $0.28 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.