Elpis Jar

Keep small treasures in a jar with hope beneath

A lidded jar for the myth of Pandora: when everything else escaped, hope stayed in the bottom. An 84 mm jar with a fluted, scalloped outline like an ancient vessel wears a knobbed lid, and the word HOPE is engraved under its base, so whatever you keep in it, hope is always there. A gift for someone going through a hard time.

Customize this model

Size: 84 × 84 × 70 mm
Shape: Flower-shaped
Walls: 2.4 mm
Volume: 78.0 cm³
Est. weight (PLA): 96.7 g
Parts to print: 2
Category: Geometric & decorative
Made by: Krypto
Built in: 14 steps

What’s in it

Flower-shaped, 84 × 84 × 70 mm, with 2.4 mm walls
Engraved text: “HOPE”
Telescoping lid (prints separately)

How to print it

Print in terracotta or matte black; lid prints separately.

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

Filament: at most about 96.7 g of PLA printed solid (roughly $1.93 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the elpis Jar model?

The elpis Jar model measures 84 × 84 × 70 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print in terracotta or matte black; lid prints separately. Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

How much filament does it use?

At most about 96.7 g of PLA (78.0 cm³ printed solid), roughly $1.93 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.