AR view

Holdfast

Hold a curtain open on the wall

A turned curtain holdback. The rosette sits on the wall, the post holds the gathered curtain and the broad cap keeps it on; the screw goes in through the hollow post, and the cap recess takes a wooden disc, a coin or a button to match the room.

Customize this model

Size (Base A): Ø 70 mm, 9 mm tall
Shape: Round
Walls: 4.0 mm
Volume: 42.0 cm³
Est. weight (PLA): 52.1 g
Parts to print: 1
Category: Home hardware & architecture
Made by: Krypto
Built in: 26 steps

What’s in it

Round, Ø 70 mm, 9 mm tall, with 4.0 mm walls
3 holes in the floor
2 more bases built on (Bases B–C)
Base B: round, Ø 26 mm, 70 mm tall (stacked)
Base C: round, Ø 56 mm, 10 mm tall (stacked)

How to print it

Print upright; PETG. Long screwdriver through the post.

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

Filament: at most about 52.1 g of PLA printed solid (roughly $1.04 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the holdfast model?

The holdfast model measures Ø 70 mm, 9 mm tall. That is Base A; 2 more bases are built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print upright; PETG. Long screwdriver through the post. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

How much filament does it use?

At most about 52.1 g of PLA (42.0 cm³ printed solid), roughly $1.04 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.