Gadget charging hotel — 3D-printable model preview

AR view

Cables & charging Advanced

Gadget charging hotel

Charge three devices on three open floors

A three-storey charging hotel for phones, earbuds and a watch: each floor is open at the front like a hotel room, with a cable port in the back wall. The floors stack and come apart, so add another storey when you buy another gadget.

Customize this model

Size (Base A): 150 × 96 × 46 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 140 cm³
Est. weight (PLA): 174 g
Parts to print: 1
Category: Cables & charging
Made by: Krypto
Built in: 41 steps

What’s in it

Rectangular, 150 × 96 × 46 mm, with 2.4 mm walls
2 holes in the walls
2 more bases built on (Bases B–C)
Base B: rectangular, 150 × 96 mm, 46 mm tall (stacked)
Base C: rectangular, 150 × 96 mm, 46 mm tall (stacked)

How to print it

Feed a cable up through each back port; a 3-port USB charger fits behind it.

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

Filament: at most about 174 g of PLA printed solid (roughly $3.48 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the gadget charging hotel model?

The gadget charging hotel model measures 150 × 96 × 46 mm (width × depth × height). That is Base A; 2 more bases are built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Feed a cable up through each back port; a 3-port USB charger fits behind it. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

How much filament does it use?

At most about 174 g of PLA (140 cm³ printed solid), roughly $3.48 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More cables & charging

Weighted cable-end anchor

Stop charging cables sliding off the desk

Simple

RJ45 broken-latch repair clip

Fix a network cable with a snapped latch

Simple (set)

Standing desk cable spine links

Guide cables up a standing desk

Medium

Monitor arm cable clip

Route cables along a monitor arm

Simple (set)

Laptop one-push port block

Dock a laptop with one push

Multi-part assembly

Shelf Alibi

Hide a charging hub among the books

Medium

Cordflag

Label cables right behind the plug

Simple (set)

Handheld gaming PC stand

Stand a handheld gaming PC upright while it charges

Medium

See all 44 in Cables & charging

Make it fit your space

Change the size, walls, dividers, holes and labels of the gadget charging hotel model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model