Broch

Keep pens in the core and flat tools in the wall gap

A pen pot built like an Iron Age broch, whose double walls hid a gallery between them. Pens and pencils stand in the central tower, and the 14 mm ring between the walls takes rulers, scissors, a letter opener and chopsticks, so flat tools never fall over or hide among the pens.

Customize this model

Size: Ø 92 mm, 112 mm tall
Shape: Round
Walls: 2.4 mm
Volume: 132 cm³
Est. weight (PLA): 163 g
Parts to print: 1
Category: Desk organisation
Made by: Krypto
Built in: 9 steps

What’s in it

Round, Ø 92 mm, 112 mm tall, with 2.4 mm walls

How to print it

Print without supports; 3 perimeters.

Prints as shown on its floor, no supports.

Filament: at most about 163 g of PLA printed solid (roughly $3.26 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the broch model?

The broch model measures Ø 92 mm, 112 mm tall. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print without supports; 3 perimeters. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 163 g of PLA (132 cm³ printed solid), roughly $3.26 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.