Green Roof

Store desk things under a moss garden roof

A two-drawer desk chest with a living roof. The roof is a shallow tray for preserved moss or a sedum mat in a liner, overhanging the chest like the eaves of a turf-roofed cabin, while the drawers below take cables, cards and stationery.

Customize this model

Size (Base A): 140 × 100 × 64 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 211 cm³
Est. weight (PLA): 261 g
Parts to print: 3
Category: Desk organisation
Made by: Krypto
Built in: 15 steps

What’s in it

Rectangular, 140 × 100 × 64 mm, with 2.4 mm walls
2 pull-out drawers in a sleeve
One more base built on (Base B)
Base B: rectangular, 150 × 110 mm, 20 mm tall (stacked)

How to print it

Line the roof tray before planting live sedum.

Prints as shown on its floor, no supports. The 2 drawers print separately from the case. Stacked parts are fused into one print.

Filament: at most about 261 g of PLA printed solid (roughly $5.23 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the green Roof model?

The green Roof model measures 140 × 100 × 64 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Line the roof tray before planting live sedum. Prints as shown on its floor, no supports. The 2 drawers print separately from the case. Stacked parts are fused into one print.

How much filament does it use?

At most about 261 g of PLA (211 cm³ printed solid), roughly $5.23 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

3 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.