Bond Brick

Build a pen wall in stretcher bond

A pen holder that you lay like brickwork. Each brick has two cores open top and bottom; stack them in stretcher bond, every course shifted half a brick, and the cores line up through the courses so pens drop right through the wall, which you can build long, stepped or round a corner of the desk.

Customize this model

Size: 80 × 40 × 30 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 8.6 cm³
Est. weight (PLA): 10.6 g
Parts to print: 1
Category: Desk organisation
Made by: Krypto
Built in: 18 steps

What’s in it

Rectangular, 80 × 40 × 30 mm, with 2.4 mm walls
1 divider in a grid layout
2 holes in the floor

How to print it

Print several in brick red, concrete grey or white.

Prints as shown on its floor, no supports.

Filament: at most about 10.6 g of PLA printed solid (roughly $0.21 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the bond Brick model?

The bond Brick model measures 80 × 40 × 30 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print several in brick red, concrete grey or white. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 10.6 g of PLA (8.6 cm³ printed solid), roughly $0.21 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.