Bond Coping

Cap a Bond Brick wall with a phone slot and tray

The coping course for a Bond Brick wall. It caps the top bricks like the coping on a garden wall, closing the cores you are not using, and on top it carries a slot that stands a phone or a stack of cards upright plus a shallow tray in front for clips and a USB stick.

Customize this model

Size: 80 × 40 × 24 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 11.0 cm³
Est. weight (PLA): 13.6 g
Parts to print: 1
Category: Desk organisation
Made by: Krypto
Built in: 20 steps

What’s in it

Rectangular, 80 × 40 × 24 mm, with 2.4 mm walls
2 dividers

How to print it

Print in a contrasting colour to the bricks.

Prints as shown on its floor, no supports.

Filament: at most about 13.6 g of PLA printed solid (roughly $0.27 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the bond Coping model?

The bond Coping model measures 80 × 40 × 24 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print in a contrasting colour to the bricks. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 13.6 g of PLA (11.0 cm³ printed solid), roughly $0.27 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.