Tendril

Gather plant stems round a cane without tying

A support for floppy stems that coils like a tendril. Slide the hub down a garden cane to the right height, then feed the stems of peonies, tomatoes or tall herbs into the open end of the spiral and slide them round into its turns. Nothing needs tying, and each stem keeps its own channel.

Customize this model

Size: 110 × 122 × 9 mm
Shape: Custom outline
Walls: 4.0 mm
Volume: 14.3 cm³
Est. weight (PLA): 17.7 g
Parts to print: 1
Category: Garden & plants
Made by: Krypto
Built in: 9 steps

What’s in it

Custom outline, 110 × 122 × 9 mm, with 4.0 mm walls
Custom outline traced from a shape
1 hole in the floor

How to print it

PETG or ASA outdoors. Print flat.

Filament: at most about 17.7 g of PLA printed solid (roughly $0.35 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the tendril model?

The tendril model measures 110 × 122 × 9 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

Usually not. PETG or ASA outdoors. Print flat.

How much filament does it use?

At most about 17.7 g of PLA (14.3 cm³ printed solid), roughly $0.35 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.