Barbican

Guard a seedling from slugs with a water moat

A castle moat for one precious seedling. Set the ring on the soil round the plant and fill the outer channel with water: slugs and snails will not cross it, while the plant grows up through the open centre and the inner wall keeps soil out of the moat.

Customize this model

Size: Ø 124 mm, 30 mm tall
Shape: Round
Walls: 2.4 mm
Volume: 66.2 cm³
Est. weight (PLA): 82.1 g
Parts to print: 1
Category: Garden & plants
Made by: Krypto
Built in: 12 steps

What’s in it

Round, Ø 124 mm, 30 mm tall, with 2.4 mm walls
1 hole in the floor

How to print it

PETG outdoors; top up the moat after hot days.

Prints as shown on its floor, no supports.

Filament: at most about 82.1 g of PLA printed solid (roughly $1.64 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the barbican model?

The barbican model measures Ø 124 mm, 30 mm tall. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. PETG outdoors; top up the moat after hot days. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 82.1 g of PLA (66.2 cm³ printed solid), roughly $1.64 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.