Solar Pavilion — 3D-printable model preview

AR view

Garden & plants Advanced

Solar Pavilion

House a solar stake light in a glowing pavilion

A garden pavilion for a cheap solar stake light. Drop the solar head into the roof: its panel sits on top in the sun, its LED shines down inside, and at night the four columns and low sill glow like a lit tea house on the border. The stake passes through the floor into the soil.

Customize this model

Size (Base A): 110 × 110 × 100 mm
Shape: Rectangular
Walls: 5.0 mm
Volume: 127 cm³
Est. weight (PLA): 158 g
Parts to print: 1
Category: Garden & plants
Made by: Krypto
Built in: 35 steps

What’s in it

Rectangular, 110 × 110 × 100 mm, with 5.0 mm walls
3 holes in the floor
2 more bases built on (Bases B–C)
Base B: rectangular, 146 × 146 mm (stacked)
Base C: rectangular, 100 × 100 mm (stacked)

How to print it

PETG or ASA outdoors. Fits solar heads 58 to 70 mm wide.

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

Filament: at most about 158 g of PLA printed solid (roughly $3.15 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the solar Pavilion model?

The solar Pavilion model measures 110 × 110 × 100 mm (width × depth × height). That is Base A; 2 more bases are built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. PETG or ASA outdoors. Fits solar heads 58 to 70 mm wide. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

How much filament does it use?

At most about 158 g of PLA (127 cm³ printed solid), roughly $3.15 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More garden & plants

Plant stem support clip

Fix plant stems to canes

Simple

Garden cane connector

Build garden frames from canes

Medium (set)

Plant pot feet

Raise plant pots for drainage

Medium (set)

Seed tray dibber board

Make evenly spaced holes for sowing

Advanced

Solar garden light stake

Repair solar garden lights

Medium

Arbour Stake

Train a climbing houseplant over an arch

Simple

Tendril

Gather plant stems round a cane without tying

Simple

Barbican

Guard a seedling from slugs with a water moat

Simple

See all 93 in Garden & plants

Make it fit your space

Change the size, walls, dividers, holes and labels of the solar Pavilion model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model