Arbour Stake

Train a climbing houseplant over an arch

A round-headed garden arch for a houseplant pot. Push the pointed legs into the compost until the flanges stop at the soil, then wind a hoya, jasmine or climbing pothos round the hoop: the little inward spurs hold the ties so the plant grows into an arbour instead of a tangle.

Customize this model

Size: 121 × 272 × 10 mm
Shape: Custom outline
Walls: 5.0 mm
Volume: 23.4 cm³
Est. weight (PLA): 29.1 g
Parts to print: 1
Category: Garden & plants
Made by: Krypto
Built in: 5 steps

What’s in it

Custom outline, 121 × 272 × 10 mm, with 5.0 mm walls
Custom outline traced from a shape

How to print it

Print flat in PETG; green or terracotta suits most pots.

Filament: at most about 29.1 g of PLA printed solid (roughly $0.58 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the arbour Stake model?

The arbour Stake model measures 121 × 272 × 10 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

Usually not. Print flat in PETG; green or terracotta suits most pots.

How much filament does it use?

At most about 29.1 g of PLA (23.4 cm³ printed solid), roughly $0.58 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.