AR view

Tattoo ink-cap station

Hold tattoo ink caps steady during a session

A steady ink-cap stand for tattoo artists. Four small and four large caps sit in the pierced deck so they can't be knocked over mid-line, and the tray below catches any spill. Cover it with barrier film like the rest of the station.

Customize this model

Size (Base A): 160 × 64 × 22 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 43.7 cm³
Est. weight (PLA): 54.2 g
Parts to print: 1
Category: Trade & professional tools
Made by: Krypto
Built in: 55 steps

What’s in it

Rectangular, 160 × 64 × 22 mm, with 2.4 mm walls
8 holes in the floor
One more base built on (Base B)
Base B: rectangular, 160 × 64 mm, 7 mm tall (stacked)

How to print it

Holes fit 9 mm and 13 mm ink caps; wrap in barrier film as usual.

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

Filament: at most about 54.2 g of PLA printed solid (roughly $1.08 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the tattoo ink-cap station model?

The tattoo ink-cap station model measures 160 × 64 × 22 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Holes fit 9 mm and 13 mm ink caps; wrap in barrier film as usual. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

How much filament does it use?

At most about 54.2 g of PLA (43.7 cm³ printed solid), roughly $1.08 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More trade & professional tools

Ribbed lightweight plasterer's hawk

Carry plaster or mortar on a light hawk

Advanced

Survey pole bull's-eye level clip

Hold a survey pole plumb

Simple

Spark plug thread starter

Start spark plugs without cross-threading

Medium

Upholstery tucking tool

Tuck fabric into furniture frames

Simple

Gridfinity lever-connector bin

Sort lever wire connectors by size in a Gridfinity bin

Medium

Conductor size and strip-length card

Strip wires to length and check conductor size

Medium

Copper pipe square-marking collar

Mark square cuts on copper pipe

Simple

Notched-trowel wear gauge

Check when a notched trowel is worn out

Medium

See all 22 in Trade & professional tools

Make it fit your space

Change the size, walls, dividers, holes and labels of the tattoo ink-cap station model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model