AR view

Copper pipe square-marking collar

Mark square cuts on copper pipe

Snap the collar onto 15 or 22 mm copper pipe, slide its flat face to your mark and run a pencil round it: the line is square to the pipe, so the cut sits fully home in compression and solder fittings instead of weeping from a slanted end.

Customize this model

Size: 72 × 49 × 20 mm
Shape: Custom outline
Walls: 3.0 mm
Volume: 17.4 cm³
Est. weight (PLA): 21.5 g
Parts to print: 1
Category: Trade & professional tools
Made by: Krypto
Built in: 4 steps

What’s in it

Custom outline, 72 × 49 × 20 mm, with 3.0 mm walls
Custom outline traced from a shape

How to print it

Print in PETG.

Prints as shown on its outline, no supports.

Filament: at most about 21.5 g of PLA printed solid (roughly $0.43 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the copper pipe square-marking collar model?

The copper pipe square-marking collar model measures 72 × 49 × 20 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print in PETG. Prints as shown on its outline, no supports.

How much filament does it use?

At most about 21.5 g of PLA (17.4 cm³ printed solid), roughly $0.43 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More trade & professional tools

Ribbed lightweight plasterer's hawk

Carry plaster or mortar on a light hawk

Advanced

Survey pole bull's-eye level clip

Hold a survey pole plumb

Simple

Spark plug thread starter

Start spark plugs without cross-threading

Medium

Upholstery tucking tool

Tuck fabric into furniture frames

Simple

Conductor size and strip-length card

Strip wires to length and check conductor size

Medium

Notched-trowel wear gauge

Check when a notched trowel is worn out

Medium

Four-radius fingerboard gauge

Match string height to the fingerboard radius

Medium

Picture-hanging nail-position marker

Mark where a picture hook must go

Simple

See all 22 in Trade & professional tools

Make it fit your space

Change the size, walls, dividers, holes and labels of the copper pipe square-marking collar model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model