AR view

Gridfinity lever-connector bin

Sort lever wire connectors by size in a Gridfinity bin

A 3x2 Gridfinity bin for electricians' lever connectors: six bays for the 2-, 3- and 5-way sizes and the inline splicers, in a bin that clicks into the van's Gridfinity drawer and lifts out to the job.

Customize this model

Size: 126 × 84 × 32 mm
Shape: Rectangular
Walls: 2.0 mm
Volume: 76.7 cm³
Est. weight (PLA): 95.2 g
Parts to print: 1
Category: Trade & professional tools
Made by: Krypto
Built in: 7 steps

What’s in it

Rectangular, 126 × 84 × 32 mm, with 2.0 mm walls
Gridfinity bin with standard feet for the 42 mm grid
3 dividers in a grid layout

How to print it

Snaps into any Gridfinity baseplate.

Prints as shown on its floor, no supports.

Filament: at most about 95.2 g of PLA printed solid (roughly $1.90 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the Gridfinity lever-connector bin model?

The Gridfinity lever-connector bin model measures 126 × 84 × 32 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Snaps into any Gridfinity baseplate. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 95.2 g of PLA (76.7 cm³ printed solid), roughly $1.90 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More trade & professional tools

Ribbed lightweight plasterer's hawk

Carry plaster or mortar on a light hawk

Advanced

Survey pole bull's-eye level clip

Hold a survey pole plumb

Simple

Spark plug thread starter

Start spark plugs without cross-threading

Medium

Upholstery tucking tool

Tuck fabric into furniture frames

Simple

Tattoo ink-cap station

Hold tattoo ink caps steady during a session

Advanced

Conductor size and strip-length card

Strip wires to length and check conductor size

Medium

Copper pipe square-marking collar

Mark square cuts on copper pipe

Simple

Notched-trowel wear gauge

Check when a notched trowel is worn out

Medium

See all 22 in Trade & professional tools

Make it fit your space

Change the size, walls, dividers, holes and labels of the Gridfinity lever-connector bin model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model