Swivel Post

Anchor a tower of swivelling trays

The base of the Swivel tower: a 40 mm deep bin with a socket post at one end that grips an 8 mm dowel. The bottom Swivel Layer rests on its rim and post, the rest stack above and swing out, and the bin itself is the largest, fixed layer.

Customize this model

Size (Base A): 150 × 100 × 42 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 55.8 cm³
Est. weight (PLA): 69.3 g
Parts to print: 1
Category: Jewellery & grooming
Made by: Krypto
Built in: 20 steps

What’s in it

Rectangular, 150 × 100 × 42 mm, with 2.4 mm walls
Raised grip base
One more base built on (Base B)
Base B: round, Ø 18 mm, 40 mm tall (beside)

How to print it

Print upright; push the dowel into the post.

Prints as shown on its floor, no supports.

Filament: at most about 69.3 g of PLA printed solid (roughly $1.39 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the swivel Post model?

The swivel Post model measures 150 × 100 × 42 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print upright; push the dowel into the post. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 69.3 g of PLA (55.8 cm³ printed solid), roughly $1.39 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.