Swivel Layer

Swing stacked trays out on a shared pivot

A tray that swings out from a stack: a 130 mm tray with a dowel tube on one side. Stack four on an 8 mm dowel set in the Swivel Post and each tray swings out sideways to reveal its contents, like a tackle box tower, then tucks back into one neat column.

Customize this model

Size (Base A): 130 × 90 × 28 mm
Shape: Rectangular
Walls: 2.0 mm
Volume: 30.9 cm³
Est. weight (PLA): 38.3 g
Parts to print: 1
Category: Jewellery & grooming
Made by: Krypto
Built in: 24 steps

What’s in it

Rectangular, 130 × 90 × 28 mm, with 2.0 mm walls
1 divider
1 hole in the floor
One more base built on (Base B)
Base B: round, Ø 19 mm, 28 mm tall (beside)

How to print it

Print three or four; 8 mm dowel.

Prints as shown on its floor, no supports.

Filament: at most about 38.3 g of PLA printed solid (roughly $0.77 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the swivel Layer model?

The swivel Layer model measures 130 × 90 × 28 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print three or four; 8 mm dowel. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 38.3 g of PLA (30.9 cm³ printed solid), roughly $0.77 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.