Re-stamp an image in exactly the same spot
Butt the square against the corner of the card, press the clear stamp block into its inside corner and stamp: if the print is patchy, put the block back in the same corner and stamp again in exactly the same place.
Prints flat as a plate, no supports.
Filament: at most about 16.3 g of PLA printed solid (roughly $0.33 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The stamp positioning square model measures 110 × 110 × 8 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Prints flat as a plate, no supports.
At most about 16.3 g of PLA (13.1 cm³ printed solid), roughly $0.33 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the stamp positioning square model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.