Stackable Knife Tray – 6 Slots (Customisable Size) — 3D-printable model preview

AR view

Kitchen organisers Advanced

Stackable Knife Tray – 6 Slots (Customisable Size)

Store knives safely in separate slots

A slim, stackable knife tray with six slots that hold kitchen or craft knives upright and apart, so the blades don't knock together and stay easy to grab. As it comes it's 210 × 70 × 33 mm with slots about 7 mm wide. That suits paring, utility and steak knives, chisels, scalpels or hobby blades. Every dimension can be changed in the editor: width, depth, height, wall thickness, and the number and width of slots. That way you can size it for your own drawer and knives. The Raised grip base lets one tray stack firmly on another, so you can build a tidy column in a drawer or on a shelf. It prints as one solid piece with no supports.

Customize this model

Size: 210 × 70 × 33 mm
Shape: Rectangular
Walls: 2.0 mm
Volume: 160 cm³
Est. weight (PLA): 198 g
Parts to print: 1
Category: Kitchen organisers
Made by: Krypto
Built in: 12 steps

What’s in it

Rectangular, 210 × 70 × 33 mm, with 2.0 mm walls
Raised grip base
5 dividers in a grid layout

How to print it

Print upright in PLA or PETG with no supports. Use PETG if it will sit near a sink or dishwasher.

Prints as shown on its floor, no supports.

Filament: at most about 198 g of PLA printed solid (roughly $3.96 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (a 3MF per part, plus a Bambu Studio / Orca Slicer project with every part on its own plate).

Questions

What size is the stackable Knife Tray – 6 Slots (Customisable Size) model?

The stackable Knife Tray – 6 Slots (Customisable Size) model measures 210 × 70 × 33 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print upright in PLA or PETG with no supports. Use PETG if it will sit near a sink or dishwasher. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 198 g of PLA (160 cm³ printed solid), roughly $3.96 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More kitchen organisers

Shukhov Base

Build a hyperboloid crock from straight skewers

Simple

Shukhov Collar

Twist straight skewers into a hyperboloid waist

Simple

Drawer-front peelings bag hook

Hang a scraps bag under the chopping board

Simple (set)

Mixing bowl tilt ring

Hold a mixing bowl steady at an angle

Simple

Flour canister levelling bar

Level measuring scoops over the canister

Simple

Stackable knife drawer box with lid

Keep small kitchen knives apart, with their blades covered, in a slim box that stacks in a drawer.

Multi-part assembly

Pull-and-tear bag roll drawer box

Pull one bag at a time out of a closed box in the drawer

Multi-part assembly

Handle-up cutlery quiver

Store cutlery upright, handles up, straight from the dishwasher

Medium

See all 94 in Kitchen organisers

Make it fit your space

Change the size, walls, dividers, holes and labels of the stackable Knife Tray – 6 Slots (Customisable Size) model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model