Pull-and-tear bag roll drawer box — 3D-printable model preview

AR view

Kitchen organisers Multi-part assembly

Pull-and-tear bag roll drawer box

Pull one bag at a time out of a closed box in the drawer

A roll of freezer, sandwich or bin bags turns on a wooden dowel that runs through the end walls of this box, and the first bag feeds up through the slot in the lid. Pull one bag out like a tissue and tear it off at the perforation; the next one waits in the slot. The roll never unwinds across the drawer, and you never hunt for the loose end again.

Customize this model

Size: 230 × 110 × 90 mm
Shape: Rectangular
Walls: 2.0 mm
Volume: 382 cm³
Est. weight (PLA): 474 g
Parts to print: 2
Category: Kitchen organisers
Made by: Krypto
Built in: 18 steps

What’s in it

Rectangular, 230 × 110 × 90 mm, with 2.0 mm walls
3 holes in the walls
Engraved text: “PULL”
Lift-off lid (prints separately)

How to print it

Use an 8 mm wooden dowel about 236 mm long as the axle. Fits rolls up to 220 mm long and 80 mm across in a drawer 100 mm deep.

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

Filament: at most about 474 g of PLA printed solid (roughly $9.48 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (a 3MF per part, plus a Bambu Studio / Orca Slicer project with every part on its own plate).

Questions

What size is the pull-and-tear bag roll drawer box model?

The pull-and-tear bag roll drawer box model measures 230 × 110 × 90 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Use an 8 mm wooden dowel about 236 mm long as the axle. Fits rolls up to 220 mm long and 80 mm across in a drawer 100 mm deep. Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

How much filament does it use?

At most about 474 g of PLA (382 cm³ printed solid), roughly $9.48 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF gives a 3MF per part plus a Bambu Studio / Orca Slicer project with each part on its own plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More kitchen organisers

Shukhov Base

Build a hyperboloid crock from straight skewers

Simple

Shukhov Collar

Twist straight skewers into a hyperboloid waist

Simple

Drawer-front peelings bag hook

Hang a scraps bag under the chopping board

Simple (set)

Mixing bowl tilt ring

Hold a mixing bowl steady at an angle

Simple

Flour canister levelling bar

Level measuring scoops over the canister

Simple

Stackable knife drawer box with lid

Keep small kitchen knives apart, with their blades covered, in a slim box that stacks in a drawer.

Multi-part assembly

Handle-up cutlery quiver

Store cutlery upright, handles up, straight from the dishwasher

Medium

Stack-or-spread peg pods

One set of pods for deep and shallow drawers

Advanced

See all 94 in Kitchen organisers

Make it fit your space

Change the size, walls, dividers, holes and labels of the pull-and-tear bag roll drawer box model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model