Stack-or-spread peg pods — 3D-printable model preview

AR view

Kitchen organisers Advanced

Stack-or-spread peg pods

One set of pods for deep and shallow drawers

Three square pods that lock together on pegs. In a deep drawer stack them into a three-level tower that uses the height you normally waste; in a shallow drawer lay them side by side. The bottom pod has four cells, the middle one two and the top one is open, so small things live low and bulky things high, and lifting off a pod shows the one underneath.

Customize this model

Size (Base A): 110 × 110 × 45 mm
Shape: Square
Walls: 2.0 mm
Volume: 224 cm³
Est. weight (PLA): 278 g
Parts to print: 1
Category: Kitchen organisers
Made by: Krypto
Built in: 14 steps

What’s in it

Square, 110 × 110 × 45 mm, with 2.0 mm walls
3 dividers
2 more bases built on (Bases B–C)
Base B: square, 110 × 110 mm, 45 mm tall (stacked)
Base C: square, 110 × 110 mm, 45 mm tall (stacked)

How to print it

Print the three pods separately. The pegs under each pod sit in the pod below; laid flat they act as feet.

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

Filament: at most about 278 g of PLA printed solid (roughly $5.56 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (a 3MF per part, plus a Bambu Studio / Orca Slicer project with every part on its own plate).

Questions

What size is the stack-or-spread peg pods model?

The stack-or-spread peg pods model measures 110 × 110 × 45 mm (width × depth × height). That is Base A; 2 more bases are built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print the three pods separately. The pegs under each pod sit in the pod below; laid flat they act as feet. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

How much filament does it use?

At most about 278 g of PLA (224 cm³ printed solid), roughly $5.56 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More kitchen organisers

Shukhov Base

Build a hyperboloid crock from straight skewers

Simple

Shukhov Collar

Twist straight skewers into a hyperboloid waist

Simple

Drawer-front peelings bag hook

Hang a scraps bag under the chopping board

Simple (set)

Mixing bowl tilt ring

Hold a mixing bowl steady at an angle

Simple

Flour canister levelling bar

Level measuring scoops over the canister

Simple

Handle-up cutlery quiver

Store cutlery upright, handles up, straight from the dishwasher

Medium

Hidden charging drawer dock

Charge the family's devices inside a drawer

Medium

Made-to-measure drawer bin grid

Fill any drawer exactly with bins you can swap around

Simple

See all 94 in Kitchen organisers

Make it fit your space

Change the size, walls, dividers, holes and labels of the stack-or-spread peg pods model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model