Hidden charging drawer dock — 3D-printable model preview

AR view

Kitchen organisers Medium

Hidden charging drawer dock

Charge the family's devices inside a drawer

Phones, a tablet and a smartwatch charge out of sight in the drawer by the door. Four slots hold devices on edge, so they take the width of a hand instead of half the worktop; their cables come in through the holes in the back wall, and the charger sits in the open bay with its lead leaving through the large hole behind. Close the drawer and the worktop stays clear.

Customize this model

Size: 240 × 150 × 60 mm
Shape: Rectangular
Walls: 2.0 mm
Volume: 203 cm³
Est. weight (PLA): 252 g
Parts to print: 1
Category: Kitchen organisers
Made by: Krypto
Built in: 24 steps

What’s in it

Rectangular, 240 × 150 × 60 mm, with 2.0 mm walls
4 dividers
5 holes in the walls

How to print it

Use a multi-port USB charger, leave slack in its lead so the drawer opens fully, and don't shut away a charger that runs hot.

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

Filament: at most about 252 g of PLA printed solid (roughly $5.03 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (a 3MF per part, plus a Bambu Studio / Orca Slicer project with every part on its own plate).

Questions

What size is the hidden charging drawer dock model?

The hidden charging drawer dock model measures 240 × 150 × 60 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

It may need supports in places. Use a multi-port USB charger, leave slack in its lead so the drawer opens fully, and don't shut away a charger that runs hot. Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

How much filament does it use?

At most about 252 g of PLA (203 cm³ printed solid), roughly $5.03 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More kitchen organisers

Shukhov Base

Build a hyperboloid crock from straight skewers

Simple

Shukhov Collar

Twist straight skewers into a hyperboloid waist

Simple

Drawer-front peelings bag hook

Hang a scraps bag under the chopping board

Simple (set)

Mixing bowl tilt ring

Hold a mixing bowl steady at an angle

Simple

Flour canister levelling bar

Level measuring scoops over the canister

Simple

Stack-or-spread peg pods

One set of pods for deep and shallow drawers

Advanced

Handle-up cutlery quiver

Store cutlery upright, handles up, straight from the dishwasher

Medium

Made-to-measure drawer bin grid

Fill any drawer exactly with bins you can swap around

Simple

See all 94 in Kitchen organisers

Make it fit your space

Change the size, walls, dividers, holes and labels of the hidden charging drawer dock model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model