Square pantry brick with a screw cap — 3D-printable model preview

AR view

Food storage Multi-part assembly

Square pantry brick with a screw cap

Fill a drawer with no gaps and pour like a bottle

Round jars waste the corners of every drawer. These pantry bricks are square, so two, four or six of them pack a drawer edge to edge with no gaps, but they still close with a screw cap and pour like a bottle: unscrew the cap and tip rice, lentils or oats straight into the pan, no scoop and no spill. The name goes on the cap.

Customize this model

Size: 110 × 110 × 95 mm
Shape: Square
Walls: 2.0 mm
Volume: 248 cm³
Est. weight (PLA): 307 g
Parts to print: 3
Category: Food storage
Made by: Krypto
Built in: 10 steps

What’s in it

Square, 110 × 110 × 95 mm, with 2.0 mm walls
Engraved text: “RICE”
Screw-on lid (prints separately)

How to print it

Glue the neck plate onto the shelf inside the rim, then the cap screws on. Change the cap lettering for each brick.

Prints as shown on its floor, no supports. The threaded lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.

Filament: at most about 307 g of PLA printed solid (roughly $6.14 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (a 3MF per part, plus a Bambu Studio / Orca Slicer project with every part on its own plate).

Questions

What size is the square pantry brick with a screw cap model?

The square pantry brick with a screw cap model measures 110 × 110 × 95 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Glue the neck plate onto the shelf inside the rim, then the cap screws on. Change the cap lettering for each brick. Prints as shown on its floor, no supports. The threaded lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.

How much filament does it use?

At most about 307 g of PLA (248 cm³ printed solid), roughly $6.14 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

3 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF gives a 3MF per part plus a Bambu Studio / Orca Slicer project with each part on its own plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More food storage

Loaf cut-end cap

Keep a cut loaf fresh without a bag

Simple

Flat-freeze bag former

Freeze soup in flat, stackable bricks

Medium

Soup portion freezer tray

Freeze soup and stock in portions

Multi-part assembly

Leftovers box with day marks

Track how old leftovers are

Multi-part assembly

Herb-in-oil freezer pods

Freeze herbs in oil in portions

Multi-part assembly

Two-climate fridge crisper

Keep greens and ripening fruit apart in the fridge drawer

Multi-part assembly

Oldest-first rolling egg ramp

Always use the oldest egg first

Simple

Cut-comb honey presentation box

Present and sell a slab of cut-comb honey

Multi-part assembly

See all 60 in Food storage

Make it fit your space

Change the size, walls, dividers, holes and labels of the square pantry brick with a screw cap model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model