Sprout Halo

Hold an avocado stone over water to sprout

A collar for growing an avocado from its stone without toothpicks. Rest the ring on any glass 70 to 85 mm across, press the stone into the centre pointed end up and the three tongues grip it with its base in the water. The slit lets the ring flex as the stone splits and the root grows.

Customize this model

Size: 92 × 92 × 7 mm
Shape: Custom outline
Walls: 2.4 mm
Volume: 15.8 cm³
Est. weight (PLA): 19.6 g
Parts to print: 1
Category: Garden & plants
Made by: Krypto
Built in: 5 steps

What’s in it

Custom outline, 92 × 92 × 7 mm, with 2.4 mm walls
Custom outline traced from a shape

How to print it

PETG. Print flat.

Filament: at most about 19.6 g of PLA printed solid (roughly $0.39 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the sprout Halo model?

The sprout Halo model measures 92 × 92 × 7 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

Usually not. PETG. Print flat.

How much filament does it use?

At most about 19.6 g of PLA (15.8 cm³ printed solid), roughly $0.39 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.