Aroid Pillar

Give climbing house plants a trunk to root into

A moss pole that behaves like a tree trunk for monsteras and philodendrons. Fill the square tube with damp sphagnum; aerial roots find the vertical slots and grow in. Each segment threads onto a bamboo cane through the floor, so the pillar grows with the plant one section at a time.

Customize this model

Size: 56 × 56 × 240 mm
Shape: Square
Walls: 2.4 mm
Volume: 10.9 cm³
Est. weight (PLA): 13.5 g
Parts to print: 1
Category: Garden & plants
Made by: Krypto
Built in: 40 steps

What’s in it

Square, 56 × 56 × 240 mm, with 2.4 mm walls
5 holes in the floor
1 patterned wall panel (cut-out)

How to print it

PETG. Print upright; a 16 mm cane.

Prints as shown on its floor, no supports.

Filament: at most about 13.5 g of PLA printed solid (roughly $0.27 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the aroid Pillar model?

The aroid Pillar model measures 56 × 56 × 240 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. PETG. Print upright; a 16 mm cane. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 13.5 g of PLA (10.9 cm³ printed solid), roughly $0.27 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.