Sneaker cleaning station — 3D-printable model preview

AR view

Wardrobe & dressing Medium

Sneaker cleaning station

Clean trainers over a drip grid with the kit beside it

A cleaning station for sneaker care. The trainer stands on a raised grid over the drip tray while you scrub, and the side caddy holds the brushes, cleaning solution and microfibre cloth in their own bays.

Customize this model

Size (Base A): 240 × 140 × 28 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 212 cm³
Est. weight (PLA): 263 g
Parts to print: 1
Category: Wardrobe & dressing
Made by: Krypto
Built in: 25 steps

What’s in it

Rectangular, 240 × 140 × 28 mm, with 2.4 mm walls
1 patterned wall panel (raised)
One more base built on (Base B)
Base B: rectangular, 80 × 140 mm, 80 mm tall (beside)

How to print it

PETG; tip the drip tray out over a sink.

Prints as shown on its floor, no supports.

Filament: at most about 263 g of PLA printed solid (roughly $5.26 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the sneaker cleaning station model?

The sneaker cleaning station model measures 240 × 140 × 28 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. PETG; tip the drip tray out over a sink. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 263 g of PLA (212 cm³ printed solid), roughly $5.26 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More wardrobe & dressing

Shirt collar extender with toggle

Loosen a tight shirt collar under a tie

Simple

Empty hanger collecting post

Collect empty hangers in one tidy stack

Advanced

Over-the-door hook

Add a hook to any door without screws

Simple

Hanger cascade hook

Hang clothes vertically to save rail space

Simple

Hijab pin and magnet dish

Keep hijab pins, safety pins, magnets and brooches apart

Medium

Hoodoo

Keep a cap or hat in shape on a dresser

Advanced

Cross Rib Under

Carry a hat crown on a slotted lower arch

Simple

Cross Rib Over

Lock across the lower rib to finish the dome

Simple

See all 35 in Wardrobe & dressing

Make it fit your space

Change the size, walls, dividers, holes and labels of the sneaker cleaning station model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model