Hijab pin and magnet dish — 3D-printable model preview

AR view

Wardrobe & dressing Medium

Hijab pin and magnet dish

Keep hijab pins, safety pins, magnets and brooches apart

A dressing-table dish for hijab wearers. Straight pins, safety pins and hijab magnets each have their own bay (magnets kept apart so the pins don't clump onto them), and the round side cup holds brooches and underscarf clips. Getting ready in the morning, the right pin is always to hand.

Customize this model

Size (Base A): 160 × 110 × 20 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 65.4 cm³
Est. weight (PLA): 81.1 g
Parts to print: 1
Category: Wardrobe & dressing
Made by: Krypto
Built in: 25 steps

What’s in it

Rectangular, 160 × 110 × 20 mm, with 2.4 mm walls
2 dividers
One more base built on (Base B)
Base B: round, Ø 60 mm, 20 mm tall (beside)

How to print it

Magnets go in the right-hand bay away from the pins, so they don't clump together.

Prints as shown on its floor, no supports.

Filament: at most about 81.1 g of PLA printed solid (roughly $1.62 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the hijab pin and magnet dish model?

The hijab pin and magnet dish model measures 160 × 110 × 20 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Magnets go in the right-hand bay away from the pins, so they don't clump together. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 81.1 g of PLA (65.4 cm³ printed solid), roughly $1.62 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More wardrobe & dressing

Shirt collar extender with toggle

Loosen a tight shirt collar under a tie

Simple

Empty hanger collecting post

Collect empty hangers in one tidy stack

Advanced

Over-the-door hook

Add a hook to any door without screws

Simple

Hanger cascade hook

Hang clothes vertically to save rail space

Simple

Sneaker cleaning station

Clean trainers over a drip grid with the kit beside it

Medium

Hoodoo

Keep a cap or hat in shape on a dresser

Advanced

Cross Rib Under

Carry a hat crown on a slotted lower arch

Simple

Cross Rib Over

Lock across the lower rib to finish the dome

Simple

See all 35 in Wardrobe & dressing

Make it fit your space

Change the size, walls, dividers, holes and labels of the hijab pin and magnet dish model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model