Hoodoo

Keep a cap or hat in shape on a dresser

A hat and cap stand shaped like a desert hoodoo, the rock pillar that survives because a hard cap stone shields it from rain. The wide oval cap holds a crown in shape, the banded column lifts it clear of the dresser and the eroded foot keeps it steady.

Customize this model

Size (Base A): 110 × 95 × 26 mm
Shape: Custom outline
Walls: 3.0 mm
Volume: 109 cm³
Est. weight (PLA): 136 g
Parts to print: 1
Category: Wardrobe & dressing
Made by: Krypto
Built in: 35 steps

What’s in it

Custom outline, 110 × 95 × 26 mm, with 3.0 mm walls
Custom outline traced from a shape
5 more bases built on (Bases B–F)
Base B: oval, 112 × 96 mm (stacked)
Base C: round, Ø 44 mm, 90 mm tall (stacked)
Base D: round, Ø 36 mm, 70 mm tall (stacked)
Base E: round, Ø 48 mm, 10 mm tall (stacked)
Base F: oval, 116 × 96 mm, 12 mm tall (stacked)

How to print it

Print upright; pause before the foot is closed to add sand for weight.

Prints as shown on its outline, no supports. Stacked parts are fused into one print.

Filament: at most about 136 g of PLA printed solid (roughly $2.71 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the hoodoo model?

The hoodoo model measures 110 × 95 × 26 mm (width × depth × height). That is Base A; 5 more bases are built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print upright; pause before the foot is closed to add sand for weight. Prints as shown on its outline, no supports. Stacked parts are fused into one print.

How much filament does it use?

At most about 136 g of PLA (109 cm³ printed solid), roughly $2.71 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.