Shoe-cover dispenser — 3D-printable model preview

AR view

Home hardware & architecture Multi-part assembly

Shoe-cover dispenser

Hand out disposable shoe covers at the front door

A wall dispenser for disposable shoe covers, for no-shoes homes, open houses, tradespeople and clinics. A stack drops in through the lid, and visitors pull one at a time from the wide slot at the bottom.

Customize this model

Size: 170 × 110 × 150 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 324 cm³
Est. weight (PLA): 402 g
Parts to print: 2
Category: Home hardware & architecture
Made by: Krypto
Built in: 21 steps

What’s in it

Rectangular, 170 × 110 × 150 mm, with 2.4 mm walls
1 hole in the walls
Raised text: “SHOE COVERS”
Lift-off lid (prints separately)

How to print it

Load a stack of flat shoe covers through the top; screw to the wall at shoe height.

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging. The lid prints as a separate part, top down.

Filament: at most about 402 g of PLA printed solid (roughly $8.05 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the shoe-cover dispenser model?

The shoe-cover dispenser model measures 170 × 110 × 150 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

It may need supports in places. Load a stack of flat shoe covers through the top; screw to the wall at shoe height. Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging. The lid prints as a separate part, top down.

How much filament does it use?

At most about 402 g of PLA (324 cm³ printed solid), roughly $8.05 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More home hardware & architecture

Cable and hose hanger

Hang coiled cables and hoses

Advanced

Chair leg glide caps

Protect floors under chair legs

Simple (set)

Pipe floor flange

Mount tubes for rails and shelving

Medium

Rug corner gripper

Keep rug corners flat

Simple (set)

Picture rail hook

Hang pictures from a picture rail

Simple

Picture-hanging kit box

Keep hooks, nails, picture wire and a pencil for hanging pictures

Multi-part assembly

Colour-coded cleaning cloth station

Keep microfibre cloths separated by room so they never cross-contaminate

Medium

Homecoming

Show who is home by where the keys are

Advanced

See all 86 in Home hardware & architecture

Make it fit your space

Change the size, walls, dividers, holes and labels of the shoe-cover dispenser model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model