Shedrow

Start seedlings in four beds beside a tool shed

An allotment for the windowsill. Four raised beds hold seed-starting compost, each with its own drainage, and a garden shed with a lift-off roof and a real door stores plant labels and the dibber. Start four crops at once and the plot front shows the plot number.

Customize this model

Size (Base A): 180 × 110 × 28 mm
Shape: Rectangular
Walls: 2.0 mm
Volume: 75.2 cm³
Est. weight (PLA): 93.2 g
Parts to print: 2
Category: Garden & plants
Made by: Krypto
Built in: 51 steps

What’s in it

Rectangular, 180 × 110 × 28 mm, with 2.0 mm walls
3 dividers
5 holes in the floor and walls
Engraved text: “PLOT 14”
One more base built on (Base B)
Base B: rectangular, 50 × 60 mm, 56 mm tall (beside)

How to print it

Stand it on a drip saucer. Print in green and timber brown.

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging. The added base's lid prints separately.

Filament: at most about 93.2 g of PLA printed solid (roughly $1.86 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the shedrow model?

The shedrow model measures 180 × 110 × 28 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

It may need supports in places. Stand it on a drip saucer. Print in green and timber brown. Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging. The added base's lid prints separately.

How much filament does it use?

At most about 93.2 g of PLA (75.2 cm³ printed solid), roughly $1.86 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.