Seedvault

Archive saved seeds in three labelled drawers

A Brutalist seed archive inspired by the vaults that store the world's crops. Three drawers sized for seed packets sit behind a heavy 130 mm block with chamfered edges, the side is engraved with the vault name and the year, and vent slots on the back let the packets breathe. Drop a sachet of silica gel in each drawer.

Customize this model

Size: 130 × 92 × 75 mm
Shape: Rectangular
Walls: 3.0 mm
Volume: 205 cm³
Est. weight (PLA): 254 g
Parts to print: 4
Category: Garden & plants
Made by: Krypto
Built in: 33 steps

What’s in it

Rectangular, 130 × 92 × 75 mm, with 3.0 mm walls
Raised square base
Engraved text: “SEED VAULT”, “EST. 2026”
1 patterned wall panel (engraved)
3 pull-out drawers in a sleeve

How to print it

Print in a stone grey. Silica gel sachets keep seeds dry.

Prints as shown on its floor, no supports. The 3 drawers print separately from the case.

Filament: at most about 254 g of PLA printed solid (roughly $5.08 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the seedvault model?

The seedvault model measures 130 × 92 × 75 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print in a stone grey. Silica gel sachets keep seeds dry. Prints as shown on its floor, no supports. The 3 drawers print separately from the case.

How much filament does it use?

At most about 254 g of PLA (205 cm³ printed solid), roughly $5.08 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

4 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.