Cribwork

Stack notched bars into a log-cabin pot cover

One log of a log-cabin crib. Every bar has half-depth notches top and bottom near both ends, so bars laid crosswise interlock course by course like a cabin corner. Stack sixteen into a cachepot round a nursery pot, a lantern round an LED candle or a crib for pens, as tall as you like.

Customize this model

Size: 130 × 10 × 10 mm
Shape: Custom outline
Walls: 5.0 mm
Volume: 11.9 cm³
Est. weight (PLA): 14.7 g
Parts to print: 1
Category: Garden & plants
Made by: Krypto
Built in: 4 steps

What’s in it

Custom outline, 130 × 10 × 10 mm, with 5.0 mm walls
Custom outline traced from a shape

How to print it

Print sixteen flat as shown; bars come out solid.

Prints as shown on its outline, no supports.

Filament: at most about 14.7 g of PLA printed solid (roughly $0.29 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the cribwork model?

The cribwork model measures 130 × 10 × 10 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print sixteen flat as shown; bars come out solid. Prints as shown on its outline, no supports.

How much filament does it use?

At most about 14.7 g of PLA (11.9 cm³ printed solid), roughly $0.29 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.