Shardspire

Hold pens in a cluster of crystal shafts

A crystal cluster that holds pens. Five hexagonal shafts of different heights lean together like a giant quartz point, the tallest 120 mm, each one an open cup for a pen, a brush or a stylus. Print it in translucent PETG and the light runs up the facets.

Customize this model

Size (Base A): 34 × 30 × 120 mm
Shape: Hexagonal
Walls: 2.0 mm
Volume: 69.8 cm³
Est. weight (PLA): 86.5 g
Parts to print: 1
Category: Desk organisation
Made by: Krypto
Built in: 36 steps

What’s in it

Hexagonal, 34 × 30 × 120 mm, with 2.0 mm walls
4 more bases built on (Bases B–E)
Base B: hexagonal, 28 × 25 mm, 90 mm tall (beside)
Base C: hexagonal, 26 × 23 mm, 76 mm tall (beside)
Base D: hexagonal, 22 × 20 mm, 52 mm tall (beside)
Base E: hexagonal, 30 × 26 mm, 98 mm tall (beside)

How to print it

Translucent or glitter PETG; print upright with no supports.

Prints as shown on its floor, no supports.

Filament: at most about 86.5 g of PLA printed solid (roughly $1.73 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the shardspire model?

The shardspire model measures 34 × 30 × 120 mm (width × depth × height). That is Base A; 4 more bases are built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Translucent or glitter PETG; print upright with no supports. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 86.5 g of PLA (69.8 cm³ printed solid), roughly $1.73 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.