Rooftop Nine

Sort pens, earbuds and clips on a rooftop scene

A city rooftop as a desk tidy. The parapet-walled deck catches clips and keys, the water tower is the pen cup and the stair bulkhead with its little door holds earbuds or sticky flags. A rooftop scene that does the work of three organisers.

Customize this model

Size (Base A): 170 × 120 × 16 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 90.0 cm³
Est. weight (PLA): 112 g
Parts to print: 1
Category: Desk organisation
Made by: Krypto
Built in: 35 steps

What’s in it

Rectangular, 170 × 120 × 16 mm, with 2.4 mm walls
1 hole in the walls
Engraved text: “ROOF 9”
2 more bases built on (Bases B–C)
Base B: round, Ø 46 mm, 90 mm tall (beside)
Base C: rectangular, 62 × 44 mm, 60 mm tall (beside)

How to print it

Print in concrete grey with a rust-red water tower.

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

Filament: at most about 112 g of PLA printed solid (roughly $2.23 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the rooftop Nine model?

The rooftop Nine model measures 170 × 120 × 16 mm (width × depth × height). That is Base A; 2 more bases are built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

It may need supports in places. Print in concrete grey with a rust-red water tower. Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

How much filament does it use?

At most about 112 g of PLA (90.0 cm³ printed solid), roughly $2.23 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.