Gorgebed

Keep pens in a canyon between two cliff planters

A desk landscape with a river of pens. Two cliff planters, one low and one high, frame a narrow canyon floor where pens and pencils lie; fill the clifftops with moss, sand or small succulents. Seen from the side it is a tiny gorge running along the front of your monitor.

Customize this model

Size (Base A): 200 × 28 × 12 mm
Shape: Rectangular
Walls: 2.0 mm
Volume: 37.3 cm³
Est. weight (PLA): 46.3 g
Parts to print: 1
Category: Desk organisation
Made by: Krypto
Built in: 20 steps

What’s in it

Rectangular, 200 × 28 × 12 mm, with 2.0 mm walls
2 more bases built on (Bases B–C)
Base B: rectangular, 200 × 30 mm, 26 mm tall (beside)
Base C: rectangular, 200 × 32 mm, 48 mm tall (beside)

How to print it

Print in sandstone colours; the planters need no drainage for moss.

Prints as shown on its floor, no supports.

Filament: at most about 46.3 g of PLA printed solid (roughly $0.93 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the gorgebed model?

The gorgebed model measures 200 × 28 × 12 mm (width × depth × height). That is Base A; 2 more bases are built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print in sandstone colours; the planters need no drainage for moss. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 46.3 g of PLA (37.3 cm³ printed solid), roughly $0.93 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.