Rosace

Throw coloured light through window tracery

A window rose for sunlight. Tape coloured acetate or tissue behind the seven round lights, hang it on a thread in a sunny window, and the twelve-lobed tracery throws a pool of coloured light across the room as the sun moves, like a rose window in a small church.

Customize this model

Size: 156 × 156 × 8 mm
Shape: Custom outline
Walls: 3.0 mm
Volume: 35.9 cm³
Est. weight (PLA): 44.5 g
Parts to print: 1
Category: Geometric & decorative
Made by: Krypto
Built in: 41 steps

What’s in it

Custom outline, 156 × 156 × 8 mm, with 3.0 mm walls
Custom outline traced from a shape
8 holes in the floor

How to print it

Print flat in dark PLA so the colours glow.

Filament: at most about 44.5 g of PLA printed solid (roughly $0.89 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the rosace model?

The rosace model measures 156 × 156 × 8 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

Usually not. Print flat in dark PLA so the colours glow.

How much filament does it use?

At most about 44.5 g of PLA (35.9 cm³ printed solid), roughly $0.89 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.