Ravenala Fan

Fan letters and cards apart in seven slots

A letter and card fan drawn from the traveller’s palm, whose leaves open in one flat plane. Seven petioles rise from one root and splay apart, so every letter, card or bill drops into its own V, leans at its own angle and stays readable at a glance.

Customize this model

Size: 220 × 145 × 70 mm
Shape: Custom outline
Walls: 5.0 mm
Volume: 571 cm³
Est. weight (PLA): 708 g
Parts to print: 1
Category: Desk organisation
Made by: Krypto
Built in: 4 steps

What’s in it

Custom outline, 220 × 145 × 70 mm, with 5.0 mm walls
Custom outline traced from a shape

How to print it

Print as it comes, profile on the bed; strokes print solid.

Filament: at most about 708 g of PLA printed solid (roughly $14.16 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the ravenala Fan model?

The ravenala Fan model measures 220 × 145 × 70 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

Usually not. Print as it comes, profile on the bed; strokes print solid.

How much filament does it use?

At most about 708 g of PLA (571 cm³ printed solid), roughly $14.16 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.