Dreikanter

Stand a phone or tablet at three angles by turning it

A phone and tablet stand after the dreikanter, a stone the desert wind grinds into three faces. Rest it on any face and the device stands in the groove of the next: 50 degrees for typing, 60 for video, 70 for reading. Turning the stone is the adjustment.

Customize this model

Size: 112 × 83 × 70 mm
Shape: Custom outline
Walls: 4.0 mm
Volume: 111 cm³
Est. weight (PLA): 137 g
Parts to print: 1
Category: Desk organisation
Made by: Krypto
Built in: 4 steps

What’s in it

Custom outline, 112 × 83 × 70 mm, with 4.0 mm walls
Custom outline traced from a shape

How to print it

Print as it comes, open end up; it is a light shell.

Filament: at most about 137 g of PLA printed solid (roughly $2.75 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the dreikanter model?

The dreikanter model measures 112 × 83 × 70 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

Usually not. Print as it comes, open end up; it is a light shell.

How much filament does it use?

At most about 137 g of PLA (111 cm³ printed solid), roughly $2.75 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.